TELTONIKA Router LTE RUT956 (Cat 4), 2G, GNSS, WiFi

TELTONIKA Router LTE RUT956 (Cat 4), 2G, GNSS, WiFi

Model:

RUT956

Description:

RUT956 router

RUT956 is an industrial router that combines dual-SIM 4G LTE cellular, Wi-Fi and wired connectivity options, in addition to GNSS capabilities. Automatic WAN failover ensures the solution continues to operate even if the main connection is lost. Serial communication interfaces enable the integration of the most diverse devices, even older ones. Digital and analog I/O with advanced RutOS software features facilitate equipment control, automation and event notification.

The router is equipped with advanced industrial software features, including Modbus, SNMP, TR-069, NTRIP, MQTT and many VPNs.

Type: GSM 3G/4G
Data transmission: GPRS
Data transmission: UMTS
Data transmission: LTE
GSM network: 1900 MHz
GSM network: 900 MHz
UMTS network: 850 MHz
UMTS network: 900 MHz
UMTS network: 2100 MHz
LTE network: 2300 MHz
LTE network: 2500 MHz
LTE network: 2100 MHz
LTE network: 800 MHz
LTE network: 850 MHz
LTE network: 900 MHz
LTE network: 1800 MHz
Aero2 support: No
Standards: 802.11n
Standards: 802.11g
Standards: 802.3u
Standards: 802.11b
Standards: 802.11e
Standards: 802.3
Operating frequency: 2,4 GHz
Number of antennas: Five connectors
Antenna: Detachable external
Security:

• Authentication: Pre-shared key, digital certificates, X.509 certificates
• Firewall: Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T
• Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (
• SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
• VLAN: Port and tag based VLAN separation
• Mobile quota control: Set up custom data limits for both SIM cards
• WEB filter: Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
• Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter
• Secure Boot: Cryptographic integrity check of the each system boot process (available on device with special order code RUT955T073B0).
• WiFi security: WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK, AES-CCMP, TKIP, Auto Cipher modes, client separation

Management, monitoring, configuration:

• Cellular functions: Band lock, SIM switch, Operator black/white list, Data/SMS limits
• Network: Failover (Network backup), VLAN, QoS, Load Balancin
• Monitoring and management: WEB UI, CLI, SSH, CALL, SMS, TR-069, SNMP, JSON-RPC, MQTT, MODBUS, RMS
• Cloud solutions: RMS, FOTA, Telenor, Azure IoT Hub, Cloud of Things, Cumulocity, ThingWorx
• NTP: NTP Server, NTP Client, Sync with: External NTP server, GNSS, Mobile operator
• GNSS: NMEA forwarding, AVL, Geofencing
• Modbus: TCP slave, TCP master, RTU master, RTU gateway, Modbus over MQTT
• Serial: Console, Over IP, Modem, NTRIP, Modbus

Special functions:
Card reader: None
I/O ports: 1 x USB 2.0
I/O ports: 1 x 10/100 Mbit/s WAN
I/O ports: 2 x SIM card slot
I/O ports: 3 x 10/100 Mbit/s
I/O ports: 1 x Console port (RS-232)
I/O ports: 1 x RS-485
SIM card: Mini
Power supply:

4pin connector, 9-30 VDC

Software:

RutOS (OpenWrt based Linux OS)

Certificates:
System Requirements:
Environment requirements:

• Operating temperature: -40°C to 75°C
• Operating humidity: 10% to 90% non-condensing

Accessories included:

• RUT956 router
• 9W power supply
• 2 x LTE antenna (magnetic mount, SMA male, 3 m cable)
• 2 x WiFi antenna (magnetic mount, RP-SMA male, 1.5 m cable)
• GNSS antenna (adhesive, SMA male, 3 m cable)
• RS485 block connector
• I/O block connector
• Ethernet cable (1.5 m)
• SIM Adapter kit
• RMS leaflet
• Quick Start Guide

Color: Black
Weight: 295 gram
Dimensions:

110 x 50 x 100 mm

Other features:

• Network support: 4G/LTE (Cat 4), 3G, 2G
• CPU: Mediatek MIPS 24Kc 580MHz
• Memory: 16 MB Flash, 128 MB RAM
• LED: 2-color network type indication, 5x signal strength, 4x Ethernet, power supply
• 10 pin connector: 1 x isolated input, 1 x digital input (dry), 1 x analog input, 1 x isolated open collector output (requires external voltage), 1 x relay output

Designation: