APC Back-UPS Pro, 900VA/540W, Tower, 230V, 5x CEE 7/7 Schuko outlets, AVR, LCD

APC Back-UPS Pro, 900VA/540W, Tower, 230V, 5x CEE 7/7 Schuko outlets, AVR, LCD

Description:

• Automatic Voltage Regulation (AVR) – Automatically boosts low voltage and lowers high voltage to levels suitable for your equipment.
• Data line surge protection – Provides protection for connected equipment from surges on data lines.
• LCD display – Manage the UPS locally with a text display that provides quick diagnostics based on stored alarm conditions and events.
• USB connectivity – Provides management of the UPS via the USB port (not available on all models).

Back-UPS Pro features and benefits

• Simple battery replacement – Increases UPS availability by allowing quick and easy battery replacement.
• Resettable circuit breaker – Easy recovery from overloads, no need to replace the fuse. (Not available on Wall Tap SKUs)
• Surge sockets only – Protect secondary electronics from surges and spikes without reducing the battery power used to supply the main electronics during a fault.
• Data line surge protection – Provides protection for connected equipment from surges on data lines.
• Surge protected batteries and sockets – Back up and protect your equipment and data during power outages, surges and spikes.
• Safety agency approved – Ensures the product has been tested and approved to work safely with connected service provider equipment and in the specified environment.
• USB connection – Use your computer to access additional power protection and UPS management features via the USB port.
• LCD status display – Provides quick access to key status information about the UPS. Multiple status indicators with load and battery bar graphs.
• Disconnected battery notification – Alerts you when the battery is not available to provide emergency power.
• Audible alarms – Provides notification when mains and UPS conditions change.
• Increased Automatic Voltage Regulation (AVR) – Saves battery life and maximises runtime by correcting low voltages without discharging the battery.
• Battery-protected and surge-only outlets – Reserves power capacity and runtime for connected equipment that requires UPS battery backup, while providing surge protection for less critical equipment
• Automatic self-test – Periodic battery self-test provides early detection of batteries that require replacement.
• Automatic Voltage Boost and Trim (AVR) – Provides higher application availability by correcting low and high voltage conditions without the use of batteries (not available on all models).
• Battery fault notification – Provides battery fault analysis with early warning, enabling timely preventive maintenance
• Green Mode – Patent-pending mode of operation that bypasses unused electrical components under good power conditions to achieve very high operational efficiency without sacrificing any protection.
• Configurable voltage transfer points – Adjust the voltage points (increase or expand the range) at which the UPS is powered from the battery to maximise useful battery life and protect sensitive electronics.
• Configurable voltage sensitivity – Switch between predetermined voltage transfer points depending on power quality (high, medium or low sensitivity), maximising useful battery life and protecting sensitive electronics.
• Cold start capability – Provides temporary battery power when mains power is off.
• Sockets arranged in a transformer block – Protect equipment with input transformer blocks without blocking access to other sockets.
• Intelligent battery management – Maximises battery performance, life and reliability with intelligent, precise charging.

Apparent power: 900 VA
Active power: 540 Watt
UPS Architecture: line-interactive
Number of phases input: 1 (230V)
No. of batteries: 1
Voltage: 24 Volt
Battery capacity: 157 VAh
Hold-up time (maks): 8 millisecond
Transfer time (max): 10 millisecond
Backup time (100% load): 4.6 Minute
Charging time: 8 Hour
Chassis type: Tower
Filters / protection: Overdischarge
Filters / protection: Overload
Filters / protection: Surge
Special functions:
Software:

PowerChute Personal Edition v3.1

Input power ports: Type F Schuko
I/O connectors: 2 x RJ-11
I/O connectors: 1 x USB 2.0
I/O connectors: 2 x RJ-45 LAN
I/O connectors: 1 x RS-232 (COM)
Environment requirements:

• Operating temperature: 0 – 40°C
• Relative humidity during operation: 0 – 95 %
• Operating altitude: 0 – 3048 metres
• Storage temperature: -15 – 45°C
• Storage relative humidity: 0 – 95 %
• Storage altitude: 0 – 15240 metres

Accessories included:

• RJ-11 cable
• User manual  
• Warranty card  
• Included software: PowerChute Personal Edition  

Color: Black
Dimensions:

250 x 100 x 382 mm

Weight: 10.73 kilogram
Other features:

• RJ-11 cable
• User manual  
• Warranty card  
• Included software: PowerChute Personal Edition  

Designation: