Стойки за монитори

Description:

The wall mount allows you to individually position 1732″ monitors. In addition, the Quick-Release function makes it easy to mount the monitor. The VESA mount is very easy to slide into the appropriate mount and fasten with a screw. Without much effort, you can adjust the monitor according to your needs with the possibility of tilting, tilting or vertical format monitors The use of an integrated gas spring makes it easy to adjust the height of the monitor Do something good for your health by optimally adjusting the monitor to your height and sitting position In addition, monitor cables can be neatly installed in the supplied cable guides

• Perfect in terms of ergonomics, adjusting the position of the monitor to the height of the user
• Integrated gas spring for easy height adjustment
• Monitors can be tilted, tilted, swiveled and height-adjustable
• VESA mount tilt: 180° (two hinges, each rotated 180°)
• VESA mount tilt: 70°
• VESA mount rotation: 360°
• Maximum height adjustment: 28 cm
• With Quick-Release function for easy and quick installation
• For flat and curved displays
• Integrated cable management system

Usage: Monitors
Type: Wall
Screen size (min): 17 Cal
Screen size (max): 32 Cal
VESA: 75 x 75
VESA: 100 x 100
Load (max): 8 kilogram
Vertical adjustment: 180 Degrees
Horizontal adjustment: 90 Degrees
Range adjustment: Yes
Range (min): 208 Millimetre
Range (max): 262 Millimetre
rotation: 360 Degrees
Corner mount: No
Stuff: Aluminum
Stuff: Plastic
Stuff: Steel
Accessories included:

• Mounting accessories
• Short instruction

Color: Mat
Color: Black
Dimensions:

30.7 cm wide x 11.4 cm deep x 30.1 cm high

Weight: 1.6 kilogram
Other features:

Description:

DTS-01

• Designed for monitors from 32 to 65 inches
• Tempered glass base
• Makes cable management easier
• Three-stage height adjustment: 512 mm / 582 mm / 652 mm
• Load capacity: up to 40 kg

Usage: Monitors
Type: Stand
Screen size (min): 32 Cal
Screen size (max): 65 Cal
VESA: 400 x 200
VESA: 300 x 250
VESA: 300 x 300
VESA: 300 x 400
VESA: 350 x 350
VESA: 400 x 100
VESA: 200 x 200
VESA: 200 x 300
VESA: 200 x 400
VESA: 300 x 100
VESA: 300 x 200
VESA: 100 x 150
VESA: 100 x 200
VESA: 100 x 300
VESA: 120 x 120
VESA: 200 x 100
VESA: 400 x 300
VESA: 400 x 400
Load (max): 40 kilogram
Vertical adjustment: 10 Degrees
Range adjustment: No
rotation: 90 Degrees
Corner mount: No
Stuff: Metal
Accessories included:
Color: Black
Dimensions:

550.0 x 655.0 x 280.0 mm

Weight: 6.2 kilogram
Other features:
Designation:

Description:

Newstar’s Neomounts Desk Mount, Model FPMA-D550DBLACK is a tilting, rotating and rotating desk mount for 2 flat screens up to 32″.

Newstar’s versatile tilt (90°), swivel (360°) and swivel (180°) technology from Newstar’s Neomounts allows the mount to change the viewing angle to take full advantage of the flat screen. The mount is manually adjustable in height from 0 to 44 centimeters Depth adjustable from 4 to 46 centimeters Innovative cable management hides and routes cables from the handle to the flat screen. Hide cables to keep your workspace tidy.

The Neomounts by Newstar FPMA-D550DBLACK has three pivot points and is suitable for screens up to 32″. The load capacity of this product is 8 kg per screen. The desk mount is suitable for screens that meet the 75×75 or 100x100mm VESA hole requirement. Different holes patterns can be covered with Newstar’s Neomount VESA adapter plates.

Thanks to the ergonomic handle, neck and back complaints can be avoided. Ideal for use in offices, on counters or at the reception desk.

All installation materials are included with the product.

Usage: Monitors
Type: Desk
Screen size (min): 10 Cal
Screen size (max): 32 Cal
VESA: 100 x 100
VESA: 75 x 75
Load (max): 8 kilogram
Vertical adjustment: 90 Degrees
Horizontal adjustment: 180 Degrees
Range adjustment: Yes
Range (min): 4 Centimeter
Range (max): 46 Centimeter
rotation: 360 Degrees
Corner mount: No
Stuff: Steel
Accessories included:
Color: Black
Dimensions:
Other features:
Designation:

Description:

LMK-02 Wall mounting kit

• Durable steel construction ensures reliable operation
• Quick and intuitive installation
• Flexible tilt adjustment
• VESA compatible (max. 440 x 330 mm)
• Lockable safety bar (padlock not included)
• Load capacity: up to 80 kg

Usage: Monitors
Usage: TV
Type: Wall
Screen size (min): 32 Cal
Screen size (max): 55 Cal
VESA: 440 x 330
VESA: 50 x 100
Load (max): 80 kilogram
Vertical adjustment: 15 Degrees
Range adjustment: No
Corner mount: No
Stuff: Steel
Accessories included:
Color: Black
Dimensions:
Weight: 3.8 kilogram
Other features:

Packaging dimensions: 556.0 x 245.0 x 54.0 mm

Designation:

Description:

Single touch SmartFit height adjustable monitor arm

Improve your posture, promote correct eye alignment, and provide neck and shoulder comfort with the Kensington SmartFit Single Monitor Arm with one-touch height adjustment. Ergonomically designed to promote well-being and increase productivity, the single-touch SmartFit One-Touch Height Adjustable Arm features Kensington’s patented SmartFit technology, which simplifies proper fit and allows users to adjust the monitors’ height, depth and angle for individual comfort. Stable in any monitor position, users can easily switch from landscape to portrait mode.

The SmartFit system simplifies perfect ergonomic height positioning, using scientifically proven research to support proper fit.

One-touch adjustable arm with built-in gas spring for easy height adjustment (6.7-19.9 or 170-505mm), 180° swivel and monitor rotation, +/- 90° tilt adjustment and smooth monitor upward movement, down, forward and backward for full articulation of movement.

The stability-focused design supports flat or curved 13-32 monitors weighing up to 19.8 lbs (9 kg) and keeps the monitor stable and stable in any position.

Easy installation with included quick release detachable VESA plate (75mm or 100mm), c-clamp (tabletop thickness range: 0.393.3 or 10mm85mm) and grommet (diameter range: 0.411.97 or 10.550mm)) installation options and included a set of tools for easy disassembly.

The cable management system keeps your monitor cables tidy for a tidy workspace.

Kensington Durability meets ANSI/BIFMA performance and security standards.

SmartFit system

Simplifies perfect ergonomic height positioning with scientifically proven research to support proper fit.

One-touch adjustable arm with built-in gas spring

Full motion articulation allows you to easily adjust the position of the monitor on your workstation. Move your monitor up, down, forward and backward with 6.7-19.9 or 170mm-505mm height adjustment, 180° swivel and swivel, and +/- 90° tilt adjustment.

Stability focused design

Supports flat or curved 13-32 monitors weighing up to 19.8 lbs (9 kg) and keeps monitors stable in any position.

Easy to install

Includes detachable VESA quick release (75mm or 100mm), c-clamp (tabletop thickness range: 0.393.3 or 10mm85mm) and grommet (diameter range: 0.411.97 or 10.5mm50mm), and included tool kit for easy disassembly.

Cable management system

Keeps monitor cables tidy for a tidy workspace.

Kensington Durability

Tested to ANSI/BIFMA performance and safety standards.

Usage: Monitors
Type: Desk
Screen size (min): 13 Cal
Screen size (max): 32 Cal
VESA: 75 x 75
VESA: 75 x 100
Load (max): 9 kilogram
Vertical adjustment: 90 Degrees
Horizontal adjustment: 90 Degrees
Range adjustment: Yes
Range (min): 170 Millimetre
Range (max): 505 Millimetre
rotation: 180 Degrees
Stuff: Steel
Accessories included:
Color: Black
Dimensions:
Other features:

Description:

Monitor arm (adjustable), 17″- 32″, up to 9 kg

• Position your screen perfectly according to your needs
• Lightweight and compact design
• Desk mount for one monitor with single monitor arm
• The arm allows you to swivel, extend, slide or tilt the monitor and allows you to rotate the monitor from landscape to portrait mode, etc.
• Works with almost any LCD monitor (max. 32″)
• Sturdy desk clamp for easy and secure fixing on a desk
• Built-in cable management for an organised and tidy workspace
• Compatible with VESA standard (100 x 100 mm and 75 x 75 mm)

Usage: Monitors
Type: Desk
Screen size (min): 17 Cal
Screen size (max): 32 Cal
VESA: 75 x 75
VESA: 100 x 100
Load (max): 9 kilogram
Range adjustment: No
rotation: 90 Degrees
Corner mount: No
Stuff: Plastic
Stuff: Steel
Accessories included:
Color: Black
Dimensions:
Weight: 2.7 kilogram
Other features:

• Installation: grommet, clamp
• Suggested countertop thickness: clamp: 10~85mm. grommet: 10~40mm
• Cable management: yes

Description:

One Touch Height Adjust Monitor Holder. dual monitor

The SmartFit dual arm with one-touch height adjustment makes it easy to achieve perfect dual monitor ergonomics (and a neutral, comfortable posture) thanks to the patented SmartFit system and fully movable design. The rugged construction, tested to ANSI/BIFMA standards, guarantees stability in any position, and the monitor’s gas spring mount makes it easy to adjust the height, depth and angle of each monitor from side-by-side to vertical. The product’s built-in cable management system organizes and hides cables while the arms lift the dual monitors and keep them out of the way while organizing and clearing valuable desk space. Kensington Durability ensures a more ergonomic workplace for years to come.

• With SmartFit, finding the right monitor height for maximum comfort is as easy as 1-2-3. Just match your hand size to the color on the chart provided, set the height to your color and you’re done.
• The Kensington SmartFit One-Touch Height Adjustable Dual Arm makes it easy to adjust the height, depth and angle of any external monitor. With 6.7-19.9 (170mm-505mm) height adjustment, +/-90° monitor swivel and swivel, and +/-90° tilt adjustment, the product’s fully articulated design gives you total control over the position of two monitors, placing them side by side or aligning them vertically. Its counterweight tension adjustment allows you to tighten or loosen each arm to accommodate the monitor’s range of weights with the same ease and stability (hex key included).
• The Kensington SmartFit Dual Monitor Arm with one-touch height adjustment is stable in any position and supports flat or curved monitors from 13-34 inches and weighing up to 9 kg.
• One-touch height adjustable Kensington SmartFit dual monitor arm can be mounted via c-clamp (Tabletop thickness range: 0.393.3 or 1085mm) or grommet (Tabletop thickness range: 0.393.1 or 10mm 80mm; Grommet hole diameter range: 0 .41-1.97 or 10.5mm-50mm) tool kit included. Its non-durable, non-marking installation makes it easy to remove. The attached quick-release plate, detachable VESA plate (75mm or 100mm) makes the arm ideal for VESA-mounted monitors.
• The built-in cable management system in the Kensington SmartFit double arm with one-touch height adjustment keeps cables out of sight and keeps them in the arm itself.
• The Kensington SmartFit Dual Monitor with one-touch height adjustment is tested to ANSI/BIFMA performance and safety standards.

SmartFit system

Master the ergonomics of dual monitors – the correct height of two monitors with the SmartFit system. Just match your hand size to the color on the chart provided, set the height to your color and you’re done.

One-touch adjustable arms with built-in gas spring and counterbalance tension adjustment

Enjoy hassle-free height, depth and angle adjustments for any external monitor. With 6.7-19.9 (170mm-505mm) height adjustment, +/-90° monitor swivel and swivel, and +/-90° tilt adjustment, the fully articulated spring-loaded monitor arm The one-touch gas switch gives you total control over the placement of your two monitors, from horizontal to vertical and side by side to vertical. Its counterweight tension adjustment allows you to tighten or loosen each arm to accommodate the monitor’s range of weights with the same ease and stability (hex key included).

Durable construction focused on stability

The Kensington SmartFit Dual Monitor Arm with one-touch height adjustment is stable in any position and supports 13-34 diagonal flat or curved monitors weighing up to 19.8 lbs (9 kg).

Easy, universal installation

Can be mounted using c-clamp (table top thickness range: 0.393.3 or 1085 mm) or grommet (table top thickness range: 0.93.1 or 10 mm80 mm; diameter range: 0.41) or 10.5 mm-50 mm), the installation is non-permanent and leaves no traces, which facilitates disassembly in the set of tools. The included quick-release detachable VESA plate (75mm or 100mm) makes the fully articulating double arm ideal for VESA-mounted monitors.

Cable management system

The product’s cable management system organizes and hides cables while arms lift dual monitors and keep them out of the way, tidying up and freeing up valuable desk space.

Kensington Durability

The Kensington SmartFit One Button Height Adjustable Dual Monitor Arm is tested to ANSI/BIFMA standards. Trust the reliable the bones of a durable monitor arm and enjoy stability and easy adjustment for many years.

Usage: Monitors
Type: Desk
Screen size (min): 13 Cal
Screen size (max): 34 Cal
VESA: 100 x 100
VESA: 75 x 100
VESA: 75 x 75
Load (max): 9 kilogram
Vertical adjustment: 90 Degrees
Horizontal adjustment: 90 Degrees
Range adjustment: Yes
Range (min): 170 Millimetre
Range (max): 505 Millimetre
rotation: 180 Degrees
Corner mount: No
Stuff: Steel
Accessories included:
Color: Black
Dimensions:
Other features:

Description:

Desk arm for two monitors (adjustable), 17″- 32″ up to 9kg

• PERFECTLY POSITIONED MONITOR
• Lightweight and compact design
• Double arm desk mount for two monitors
• The arms allow you to swivel, extend, retract or tilt the display and allow you to rotate displays from landscape to portrait mode etc.
• Durable, sturdy desk clamp for easy and secure fixing on a desk
• Practical clips to organise cables in the arm
• Works with almost any LCD monitor (max. 32″)
• Compatible with VESA (100 x 100 mm and 75 x 75 mm)

Usage: Monitors
Type: Desk
Screen size (min): 17 Cal
Screen size (max): 32 Cal
VESA: 100 x 100
VESA: 75 x 75
Load (max): 9 kilogram
Range adjustment: No
rotation: 90 Degrees
Corner mount: No
Stuff: Steel
Stuff: Plastic
Accessories included:
Color: Black
Dimensions:
Weight: 3.5 kilogram
Other features:

• Installation: grommet, clamp
• Suggested tabletop thickness: Clamp: 10~85mm, Grommet: 10~40mm
• Cable management: yes

Description:

SmartFit Space-saving single monitor arm

• Finding the correct ergonomic monitor adjustment is easy even on shallow-deep desks thanks to the space-saving single SmartFit monitor arm. Easy, non-permanent installation includes the necessary tools and a pre-installed C-clamp facing the front of the desk, greatly simplifying installation, especially in tight spaces (optional grommet included).
• Designed for shallow spaces, the unique design of the single SmartFit monitor arm allows the monitor to be easily adjusted.
• The convenient adjustment wheel allows for quick and easy height adjustment (9.4″-18.5″), tilt and swivel (+/- 10°), swivel to landscape or portrait orientation (+/-180°), and locking the monitor in place . The VESA quick release connector simplifies monitor installation.
• The SmartFit system makes finding the right height for maximum comfort as easy as 1-2-3. Just match your hand size to the color on the chart provided, set the height to your color and you’re done.
• Easy, non-permanent installation includes the necessary tools and a pre-installed C-clamp facing the front of the desk, greatly simplifying installation, especially in tight spaces (optional grommet included). C-clamp fits desks up to 3.3 inches (85 mm) thick. Grommet mount fits desks up to 1.5 inches (40 mm) thick. Compatible with sit/stand desks.
• Perfect for home or office use, the sleek, sturdy, space-saving design complements the modern aesthetic while keeping the monitor steady and stable (supports monitors up to 32 inches and up to 17.6 lbs/8 kg). Cable management system eliminates clutter cables for a cleaner desktop.

Made for shallow spaces

The unique design allows you to easily adjust the monitor, even in tight spaces.

Adjustment wheel with comfortable grip and VESA quick connector

The dial allows you to quickly and easily adjust height (9.4″-18.5″), tilt and swivel (+/- 10°), swivel to landscape or portrait orientation (+/- 180°), and lock the monitor in place. The VESA quick release connector simplifies monitor installation.

SmartFit system

With SmartFit, finding the right height for maximum comfort is as easy as 1-2-3. Just match your hand size to the color on the chart provided, set the height to your color and you’re done.

Easy, non-permanent installation

Includes the necessary tools and a pre-installed C-clamp facing the front of the desk, greatly simplifying installation, especially in tight spaces (optional grommet included). C-clamp fits desks up to 3.3 inches (85 mm) thick. Grommet mount fits desks up to 1.5 inches (40 mm) thick. Compatible with sit/stand desks.

Perfect for home or office use

The sleek, sturdy, space-saving design complements the modern aesthetic by keeping the monitor sturdy and stable (supports monitors up to 32″ and weighing up to 17.6lbs/8kg). The cable management system eliminates cable clutter for a cleaner desktop.

Usage: Monitors
Type: Desk
Screen size (min): 10 Cal
Screen size (max): 32 Cal
VESA: 40 x 40
Load (max): 8 kilogram
Vertical adjustment: 180 Degrees
Horizontal adjustment: 180 Degrees
Range adjustment: No
Range (min): 9.4 Cal
Range (max): 18.5 Cal
rotation: 10 Degrees
Corner mount: No
Stuff: Steel
Accessories included:
Color: Black
Dimensions:
Other features:

Description:

Space-saving SmartFit arm for dual monitors on the desk

Perfect for use on narrow desks

The unique design of the arm makes it easy to adjust the position of the monitors, even in the case of desks with a small depth.

Comfortable handle with a knob and quick disassembly thanks to VESA connectors

The handle with a knob allows you to quickly and easily adjust the height (239-470 mm), tilt and swivel (+/- 10°), change the orientation horizontally or vertically (+/- 180°) and lock the position of the monitors. VESA connectors make it easy to mount monitors.

SmartFit system

The SmartFit system will allow you to set the monitor to the right, comfortable height in the blink of an eye. Just match your hand size to the color on the diagram attached to the product, set the height to the color of your choice – and you’re done!

Simple assembly and disassembly

The set includes all the necessary tools and a factory-mounted C-clamp directed towards the front of the desk, which greatly simplifies mounting, especially in tight spaces (an eyelet clamp option is also included in the set). The C-clamp fits desks up to 85mm thick and the eye clamp fits desks up to 40mm thick. The arm is suitable for mounting to sit-stand desks.

Two monitors can be mounted on a single stand

Saves valuable desk space. It allows you to set up two monitors side by side, keeping the right distance from the user.

Perfect for use at home or in the office

Sleek, durable, space-saving modern design keeps monitors steady and stable (the arm is suitable for monitors up to 27 inches diagonal and weighing up to 8 kg). The cable management system eliminates desk clutter.

Usage: Monitors
Type: Desk
Screen size (max): 27 Cal
VESA: 75 x 100
Load (max): 8 kilogram
Vertical adjustment: 10 Degrees
Horizontal adjustment: 180 Degrees
Stuff: Aluminum
Stuff: Steel
Stuff: Plastic
Accessories included:
Color: Black
Dimensions:

717 x 170 x 530 mm

Weight: 3.29 kilogram
Other features:

Height adjustment: 239 – 470 mm