Докинг станции

Description:

We create solutions that make a difference in everyday life
The Qoltec SSD docking station is the ideal solution not only for people who have documents or private files on disks, but also for small businesses who want to archive their computer data without investing in other expensive solutions. The hard disk docking station can also be connected to a TV or monitor equipped with a USB port – then it will act as a video player with a huge storage capacity, if you collect photos and videos on hard disks, then this product is dedicated to you.

Support for M.2 SATA and NVME drives
The station is compatible with M.2 drives with SATA and NVMe interfaces. It offers data transfer rates of up to 10 Gbps. In addition, the disk station from Qoltec is a device:

• Suitable for M-Key and B&M-Key NGFF SSDs with sizes: 2230, 2242, 2260, 2280, 22110,
• Support of the UASP standard, allows several commands to be executed at the same time,
• USB 3.1 Gen2 interface enables data transfer at a speed of 10 Gb/s,
• The device is compatible with USB 3.1 Gen1 and USB 2.0,
• Good stability of the device thanks to non-slip pads,
• Single M.2 drive supports up to 2TB,
• Useful when there is no other way to connect an SSD,
• No need to install drivers, simply plug into a USB port and use thanks to the simplicity of the Plug&Play function.

High-speed data transfer and organisation
Installing an SSD is easy, quick and requires no specialist technical skills. The only thing to do is to insert the NVMe or SATA SSD into the docking station, select the appropriate drive on the station as indicated in the illustration above and connect the USB-C cable to the appropriate device. Done now you can start transferring data, backing up files and organising data.

Exclusive compact housing illuminated by RGB colour LEDs
The compact and handy station for your M.2 SSD is a stylish protection for your valuable data. The station is made of high-quality aluminium, which further helps to dissipate heat. The compact size of the enclosure will allow you to take it with you to work or anywhere else and it will fit easily into a backpack. Unique design with RGB LED with infinitely variable colours.

Form factor (width): M.2
HDD interface: SATA
HDD interface: NVMe
I/O connectors: 1 x USB (Type C)
Supported operating systems: Mac OS
Supported operating systems: Windows 8
Supported operating systems: Windows
Supported operating systems: Windows XP
Supported operating systems: Windows 7
Supported operating systems: Android
Supported operating systems: Linux
Supported operating systems: Windows 10
Accessories included:

• Docking station
• User manual
• Warranty card
• USB/USB-C cable

Color: Black
Dimensions:

67 x 67 x 15 mm

Weight: 95 gram
Other features:
Designation:

Description:

We create solutions that count every day

Do you value your time and data protection is important to you? With transfer speeds of up to 5 GB/s, a USB 3.0 interface, SATA III support and support for SSD and HDD, our docking station offers everything you need in one device! The docking station has space for two HDD or SSD drives. Whether you use HDD or SSD, our docking station supports both 2.5“ and 3.5“ drives. Rubber feet ensure that the device remains stable during use.

Simply plug in and enjoy!

Our station works in plug & play mode. Simply plug it in and use it! Installing an SSD or HDD is easy, fast and requires no specialist technical skills.

Offline Cloning – Safe and Convenient

This docking station model offers two different ways of copying data:
You can place the hard drive in port A or B, connect the docking station to your computer with a USB cable and power supply, and then proceed to copy. The second way is offline copying. Cloning takes place without being connected to a computer. Simply place the two drives in ports A and B, then switch on the power. The cloning process starts when you hold down the COPY button for 3s, and the progress and completion of the process is indicated by the indicator lights.

Convenient and Universal Solution for SSD and HDD

The device is an interesting alternative not only for people who store documents or private files on disks, but also for small businesses wishing to archive their computer data without investing in expensive solutions. The hard disk docking station can also be connected to a TV or monitor equipped with a USB port, in which case it will act as a video player with a huge storage capacity. If you collect photos and videos on hard disks, this is the product for you.

No. of slots: 2
Form factor (width): 3,5“ (LFF)
Form factor (width): 2,5“ (SFF)
HDD interface: SATA III – 6 Gb/s
HDD interface: SATA II – 3 Gb/s
HDD interface: SATA I – 1,5 Gb/s
I/O connectors: 1 x USB 3.0
Supported operating systems: Windows 10
Supported operating systems: Windows 8
Supported operating systems: Windows 7
Supported operating systems: Windows XP
Supported operating systems: Mac OS
Supported operating systems: Linux
Accessories included:

• 1 x Docking Station
• 1 x AC adapter
• 1 x USB 3.0 cable
• 1 x User manual
• 1 x Warranty card

Color: White
Color: Black
Dimensions:

(L x W x H ): 110 x 120 x 83 mm

Weight: 0.453 kilogram
Other features:
Designation:

Description:

Choose a functional device

The Qoltec brand docking station is an interesting alternative, not only for people who store documents or private files on disks, but also for small businesses that want to archive their computer data without investing in expensive solutions. The docking station can also be connected to a TV or monitor equipped with a USB port – then it will be used as a video player with a huge storage capacity, if you collect photos and videos on hard drives then this product is dedicated to you.

Transmission speed of 10 Gb/s

The Qoltec brand disk drive station is a device :
– suitable for disk sizes : 2230, 2242, 2260, 2280, 22110,
– support UASP standard, allows you to execute several commands at the same time,
– USB 3.1 Gen 2 interface allows a transmission speed of 10 Gb/s,
– the device is compatible with USB 3.2 Gen 2 and backward USB 3.0 and USB 2.0,
– Good stability of the device thanks to anti-slip pads,
– LED light – informs about the operation of the device,
– single M.2 drive supports up to 2TB,
– will be useful when there is no other way to connect an SSD drive.

Quick communication

You don’t need to install drivers, you can just plug into a USB port and use thanks to the simplicity of Plug&Play. In addition, the use of the NVMe standard allows fast direct communication between the system processor and the PCI interface of the device on which the data resides, making the whole process regardless of the format of the device fast and smooth.

Solid and lightweight construction

The product is characterized by an ergonomic shape that ensures comfort of use, and the minimalist and elegant design, which is given by the thin and lightweight casing create excellent aesthetics of the device so that it will fit into any type of room. Cushioning is guaranteed by additional non-slip mats that stabilize the housing from moving during operation.

No. of slots: 1
Form factor (width): M.2
HDD interface: PCI-Express
HDD interface: SATA
Supported operating systems: Mac OS
Supported operating systems: Windows 10
Supported operating systems: Windows 2000
Supported operating systems: Windows XP
Supported operating systems: Windows Vista
Supported operating systems: Windows 7
Supported operating systems: Windows 8
Supported operating systems: Windows 11
Supported operating systems: Windows
Supported operating systems: Linux
Accessories included:

• Docking station
• USB C 3.1 cable
• User manual

Color: Black
Dimensions:

• Dimentions: 65 mm x 50 mm x 13 mm

• Disk dimentions

            22*30 mm, 22*42 mm, 22*60 mm
            22*80 mm, 22*110 mm length SSD

Weight: 0.077 kilogram
Other features:
Designation:

Description:

SuperSpeed USB 5 Gbps docking / cloning station AXAGON ADSA-D25 CLONE MINI quickly and easily connects up to two 2.5″ disks to your computer at the same time. The USB Micro-B connector on the dock and included USB Micro-B USB-A cable enables a connection to computer.

This compact helper will allow you easiest connection of any 2.5″ SATA drive to computer or notebook. Just insert one or two disks into the base at the same time, no tools or accessories are needed. Changing disks is very quick and easy.

You can use the docking station to easy cloning the contents of connected disks without the need to connect to a PC. Insert the source disk into the first slot of the station HDD A (source) and insert the target disk into the second slot HDD B (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old HDD to new SSD, including a working operating system (Windows, macOS, Linux).

SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the SSD/HDD condition. Supports sleeping of the connected disks and station.

The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber anti-slip pads prevent sliding on the table and vibrations of the hard drives. The outer casing is made of aluminum with an elegant brushed surface.

Input:
USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB 5 Gbps.
Speed up to 5 Gbit/s. 
Connection via USB Micro-B female connector.

Device support:
SATA III – 6 Gb/s (600 MB/s) interface.
Supports 2.5″ SSD/HDD.
Max. disk capacity all without limitation.
Max. 2.5″ disk height- all without limitation.

Other features:
Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2), USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible with USB 2.0.
Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed).
Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s).
Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s).
Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s).
Compliant with USB Mass Storage Class Specification.
The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s).
Supports BOT (Bulk-Only Transport).
Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later.
Supports TRIM functionality to limit gradual degradation of the SSD performance over time.
Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition.
SSD/HDD boot support in docking station.
Possibility to connect your device while running thanks to the Hot Plug support.
Full Plug and Play support.
HDD Auto Spindown – automatic spinning down when idle.
HDD Turn Off – turns off the drive after removing the device or spinning down the PC.
Connection via USB Micro-B female connector.   
USB Micro-B USB-A cable 60 cm long is included.
LED indicating SSD/HDD dock power and disk activity in both shafts.
Station dimensions 89 x 58 x 59 mm.
Weight 137 g.

Power:
Power cable USB-A 3.5/1.3 mm DC 5V length 1 m is included in the package. The cable allows powering the station from the computer USB-A port or a standard mobile phone charger with a USB-A output of 5V / min. 1A, e.g. AXAGON ACU-DS16.
Power switch.

Disk cloning feature:
Cloning takes place without connecting the station to a computer.
The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started.
Both HDD and SSD can be cloned.
Cloning speed up to 300 MB/s.
The total disk cloning time depends on the capacity of the source disk, not the amount of disk data.

Supported operating systems:
MS Windows 7 / 8 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher.
Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.

Package contains:
SSD/HDD dock,
USB Micro-B USB-A cable 60 cm long,
power cable 100 cm,
printed installation manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,
packed in a cardboard box.

 

 

 

 

 

No. of slots: 2
Form factor (width): 2,5“ (SFF)
HDD interface: ATA
I/O connectors: 1 x USB 3.0
I/O connectors: 1 x micro USB (Type B)
Supported operating systems: Windows Server 2022
Supported operating systems: Windows Server 2019
Supported operating systems: Windows Server 2016
Supported operating systems: Linux
Supported operating systems: Windows 10
Supported operating systems: Windows 7
Supported operating systems: Windows Server 2012
Supported operating systems: Windows 8
Supported operating systems: Windows 8.1
Supported operating systems: Mac OS
Supported operating systems: Windows Server 2008
Supported operating systems: Windows 11
Accessories included:

• SSD/HDD dock,
• USB Micro-B USB-A cable 60 cm long,
• power cable 100 cm,
• printed installation manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,
• packed in a cardboard box.

Color: Black
Dimensions:

89 x 58 x 59 mm

Weight: 137 gram
Other features:

Input:

• USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB 5 Gbps.
• Speeds of up to 5 Gbit/s.
• Connection via female USB Micro-B connector.

Device support:

• SATA III interface – 6 Gbps (600 MB/s).
• Support of 2.5″ SSD/HDD.
• Maximum drive capacity all without restriction.
• Maximum 2.5″ drive height all unlimited.

Features:

• Compatible with USB 3.2 Gen 2, (USB 3.1 Gen 2),USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backward compatible with USB 2.0.
• Supports transmission speeds of 5000 / 480 Mbit/s (SuperSpeed / HighSpeed).
• Compatible with Serial ATA 3.0 (SATA/600) specification, transmission speeds up to 6 Gb/s (600 MB/s).
• Compatible with Serial ATA 2.0 (SATA/300) specification, transmission rates up to 3 Gb/s (300 MB/s).
• Compatible with Serial ATA 1.0 (SATA/150) specification, transmission rates up to 1.5 Gb/s (150 MB/s).
• Compliant with USB Mass Storage Class specification.
• The overall transfer rate / baud rate of the station is given by the use of the USB interface (theor. 5 Gbit/s).
• Support of BOT (Bulk-Only Transport).
• UASP (USB Attached SCSI) support for faster data transfer in Windows 8 and later.
• Support for TRIM function to reduce slow SSD performance degradation over time.
• Support for S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology), which monitors drive health.
• Support for booting from the SSD/HDD in the docking station.
• Ability to connect the device behind the gear thanks to Hot Plug support.
• Full Plug and Play support.
• HDD Auto Spindown – automatically sleeps the drive when idle.
• HDD Turn Off – turns off the drive when the device is picked up or the PC goes to sleep.   
• Connection via USB Micro-B female connector.
• USB Micro-B USB-A cable 60 cm long included in the package.
• LEDs to indicate SSD/HDD dock power and drive activity in both docks.

Designation:

Description:

The AXAGON ADSA-M2C DUAL NVMe CLONE MASTER DOCK SuperSpeed USB-C 10 Gbps docking station quickly and easily connects up to two NVMe (PCI-Express) M.2 SSD disks to your computer. Comfortable connection allows reversible USB-C connector. You will find two cables to connect the box in the package – standard USB-C -> USB-A cable and also USB-C -> USB-C cable.

This little helper will give you the easiest and fastest way to connect up to two NVMe M.2 SSDs to your computer. You just take the M.2 card and insert it into the base, no tools or accessories are needed. Replacing M.2 SSDs is very fast and easy.

You can also use the docking station to easily clone the contents of connected NVMe disks without the need to connect to a PC. Insert the source M.2 disk into the first slot of the station (source) and insert the target M.2 disk into the second slot (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original M.2 disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of one SSD to another SSD, including a working operating system (Windows, macOS, Linux…).

Fast USB 3.2 Gen 2 interface and NVMe Express support with UASP function support allow you to enjoy the speed of modern NVMe M.2 SSD disks. TRIM support to reduce gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the connected disks.

Low docking station centre of gravity is for good stability. Rubber anti-slip pads prevent sliding on the table. Modern minimalist design of aluminum body.

Input:

• USB 3.2 Gen 2 (USB 3.1 Gen 2) SuperSpeed USB 10 Gbps transmission rates up to 10 Gbit/s.
• Connection via USB type C female connector.

Device support:

• NVMe (PCI-Express) M.2 SSD disks, one-sided and double-sided, no capacity limitation, 
• Supports M.2 drives with a size of 2230, 2242, 2260, 2280, 22110 mm,
• Supports M-KEY NVMe M.2 SSD disks,
• NGFF 75-pin M-key slot for NVMe M.2 disks.

Disk cloning feature:

• Cloning takes place without connecting the station to a computer.
• The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started.
• Cloning speed up to 1000 MB/s.
• The total disk cloning time depends on the capacity of the source disk, not the amount of disk data.

Other features:

• Compatible with USB 3.2 Gen 2, backward compatible with USB 3.2 Gen 1 (USB 3.0) and USB 2.0.
• Supports transmission rates 10.000 / 5000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed).
• Compliant with PCI Express Base Specification Revision 3.1a.
• Compliant with NVM Express 1.3 Specification.
• Compliant with USB Mass Storage Class Specification.
• The total box bandwidth / transmission rate is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s).
• The real box bandwidth / transmission rate is around 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface.
• Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later.
• Supports TRIM functionality to limit gradual degradation of the SSD performance over time.
• SSD boot support.
• Full Plug and Play support.
• Connection via USB 3.2 Gen 2 type C female connector.
• USB type C male / USB type C male cable length 25 cm in the package.
• USB type C male / USB type A male cable length 25 cm in the package.
• Aluminum body with integrated weights for better stability and rubber anti-slip pads prevent sliding on the table.
• Docking station dimensions 68 x 68 x 17 mm.
• Weight 94 g.

Power:

• Power supply using the included external AC/DC adapter 5V – 3A with 150 cm long cable.
• Power switch.

LED indication:

• 2x white LED for each disk indicating disk connection (permanent light) and data transmission (blinking).
• 4x blue LED diode indicating cloning process 25%-50%-75%-100% (blinking), resp. cloning completion (permanent light).

Supported OS:

• MS Windows 7 / 8.1 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher.

Note: Drivers are usually part of supported Operating System. When Windows 7 used it is necessary to check OS support and driver availability with the M.2 SSD manufacturer

No. of slots: 2
Form factor (width): M.2
Form factor (width): M.2 2260
Form factor (width): M.2 2280
Form factor (width): M.2 22110
Form factor (width): M.2 2242
Form factor (width): M.2 2230
HDD interface: NVMe
I/O connectors: 1 x USB (Type C)
Supported operating systems: Windows 7
Supported operating systems: Windows 8.1
Supported operating systems: Windows 10
Supported operating systems: Windows 8
Supported operating systems: Windows Server 2008
Supported operating systems: Mac OS
Supported operating systems: Linux
Supported operating systems: Windows Server 2016
Supported operating systems: Windows Server 2012
Supported operating systems: Windows Server 2019
Supported operating systems: Windows 11
Accessories included:

• NVMe dock
• Power adapter 100-240V / 5V-3A
• USB-C – USB-A cable, length 25 cm
• USB-C to USB-C cable, 25 cm long
• Multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA
• Packed in a cardboard box

Color: Black
Dimensions:

68 x 68 x 17 mm

Weight: 94 gram
Other features:
Designation:

Description:

SuperSpeed USB AXAGON ADSA-SN COMPACT HDD/SSD DOCK docking station easily and quickly connects any SATA disk to your computer.

A handy helper for the easiest and fastest way of connecting SATA disks to your computer – just plug the disk into the base. Automatic installation can be done even by the layman.

SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support limits the gradual degradation of SSD performance over time. Reading of S.M.A.R.T. information monitoring the condition of the connected disks. Supports sleeping of both the connected disks and station.

Low laid centre of gravity of the docking station for good stability. Rubber feet to reduce vibrations. Modern minimalist design of housing with aluminium casing.

Input:
USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB rate of up to 5 Gbit/s.
Connection via micro USB type B female connector.

Device support:
SATA III – 6 Gb/s (600 MB/s) interface,
supports 2.5″ HDD/SSD,
supports 3.5″ HDD,
max. disk capacity all without limitation,
max. 2.5″ disk height- all without limitation.

Other features:
Compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0, backward compatible with USB 2.0.
Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed).
Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s).
Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s).
Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s).
The total bandwidth / transmission rate of the station is determined by the USB interface used (theor. 5 Gbit/s).
Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport).
SSD/HDD boot support in docking station.
Possibility to connect your device while running thanks to the Hot Plug support.
Full Plug and Play support.
HDD Auto Spindown – automatic spinning down after period of inactivity lasting 15 minutes.
HDD Turn Off – turns off the drive after removing the device or spinning down the PC.
cable micro USB-B / USB-A 80 cm long is included.
A decent blue LED indicating the connection to the computer’s USB port (permanent light) and data transmission (blinking).
Power switch.
Power supply via a compact external AC/DC adapter 12V – 2A (24 W) with a 150 cm long supply cable.
Station dimensions 130 x 65 x 59 mm.
Weight 190 g.

Supported OSs:
MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.
Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.

Package contains:
USB 3.2 Gen 1 HDD dock,
micro USB-B – USB-A cable 80 cm long,  
power adapter 100-240V / 12V-2A,
multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,
packed in a cardboard box with clearly indicated parameters.

No. of slots: 1
Form factor (width): 2,5“ (SFF)
Form factor (width): 3,5“ (LFF)
HDD interface: SATA
HDD interface: SATA III – 6 Gb/s
I/O connectors: 1 x micro USB (Type B)
Supported operating systems: Windows 8.1
Supported operating systems: Windows 10
Supported operating systems: Linux
Supported operating systems: Mac OS
Supported operating systems: Windows XP
Supported operating systems: Windows Vista
Supported operating systems: Windows Server 2008
Supported operating systems: Windows 7
Supported operating systems: Windows Server 2012
Supported operating systems: Windows 8
Supported operating systems: Windows Server 2016
Accessories included:

• USB 3.2 Gen 1 HDD dock
• Micro USB-B – USB-A cable, length 80 cm
• Power adapter 100-240V / 12V-2A
• Installation manual
• Packed in a cardboard box with parameters clearly indicated

Color: Black
Dimensions:

130 x 65 x 59 mm

Weight: 190 gram
Other features:

Input:

• USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB with speeds of up to 5 Gbit/s.
• Connection via micro USB type B female connector.

Device support:

• SATA III interface – 6 Gb/s (600 MB/s),   
• support of 2.5″ HDD/SSD,
• 3.5″ HDD,
• Maximum drive capacity all unrestricted,
• Maximum drive height 2.5″ all without restriction.

Designation:

Description:

SuperSpeed USB 5 Gbps docking / cloning station AXAGON ADSA-ST DUAL station quickly and easily connects up to two SATA disk to your computer at the same time. The USB-B connector on the dock together with the supplied USB-B USB-A cable enables a connection to computer.

This handy helper allows you to connect SATA disks to your computer or notebook in the easiest way. No need for mounting as with an external box, just slide one or even two disks into the base at the same time. Technicians will also appreciate the fast disk replacement.

SATA 6G interface with UASP support allows you to enjoy the speed of modern SSD disks. The TRIM feature support to reduce gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the connected disks. Sleep support of attached drives and station.

Easy and fast attached disk content cloning without the need for a PC connection. The HDD dock can be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of old disk to new SSD, including a working operating system (Windows, macOS, Linux…). SSD cloning speed up to 300 MB/s.

The station case is sufficiently robust and durable, which allows perfect stability even with inserted disks. Rubber pads reduce vibration of hard drives. The outer case is made of aluminum with an elegant brushed surface.

Input:
USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB 5 Gbps.
Speed up to 5 Gbit/s.
Connection via USB type B SuperSpeed female connector.

Device support:
SATA III – 6 Gb/s (600 MB/s) interface,
supports 2.5″ SSD/HDD,
supports 3.5″ HDD,
max. disk capacity – all without restriction,
max. 2.5″ disk height- all without limitation.

Features:
Compatible with USB 3.2 Gen 2 / USB 3.1 Gen 1 (USB 3.0), backward compatible with USB 2.0.
Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed).
Compliant with Serial ATA 3.0 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s).
Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s).
Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s).
The total bandwidth / transmission rate of the station is determined by the USB 3.2 Gen1 interface used (theor. 5 Gbit/s).
Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport).
Supports TRIM functionality to limit gradual degradation of the SSD performance over time.
Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition.
SSD/HDD boot support in docking station.
Possibility to connect your device while running thanks to the Hot Plug support.
Full Plug and Play support.
HDD Auto Spin down – shutdown of disks when idle.
HDD Turn Off – turns off the drive after removing the device or spinning down the PC.   
Connection via durable large USB 3.2 Gen 1 type B female connector.
USB 3.2 Gen 1 type A male / type B female cable length 70 cm included.
3x LED indicating SSD/HDD dock power and disk activity in both shafts.
Station dimensions 142 x 102 x 80 mm.
Weight 330 g.

Power:
Power supply using the included external AC/DC adapter 12V 2.5A (30W) with 150 cm long cable.
Power switch.

Disk cloning feature:
Cloning takes place without connecting the station to a computer.
The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started.
Both HDD and SSD can be cloned.
Cloning starts by pressing and holding the CLONE button for minimally 3 seconds.
4 LEDs indicate the progress and completion of cloning.
SSD cloning speed up to 300 MB/s.
The total disk cloning time depends on the capacity of the source disk, not the amount of disk data.

Supported OS:
MS Windows 7 / 8 / 10 / 11 and later, Windows Server 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher.
Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.

Package contains:
SSD/HDD dock,
USB-B USB-A cable, 70 cm long,
power adapter 100-240V / 12V-2.5A,
multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,
packed in a cardboard box.

No. of slots: 2
Form factor (width): 2,5“ (SFF)
Form factor (width): 3,5“ (LFF)
HDD interface: SATA III – 6 Gb/s
I/O connectors: 1 x USB (Type B)
Supported operating systems: Windows 7
Supported operating systems: Windows Server 2008
Supported operating systems: Windows Server 2012
Supported operating systems: Windows 8
Supported operating systems: Windows 10
Supported operating systems: Windows 10 Home
Supported operating systems: Windows 10 Pro
Supported operating systems: Windows Server 2016
Supported operating systems: Windows Server 2019
Supported operating systems: Windows Server 2022
Supported operating systems: Linux
Supported operating systems: Mac OS
Supported operating systems: Windows 11
Accessories included:

• SSD/HDD docking station
• USB-B USB-A cable, 70 cm in length
• Power adapter 100-240V / 12V-2.5A
• Multilingual manual
• Packed in a cardboard box

Color: Black
Dimensions:

142 x 102 x 80 mm

Weight: 330 gram
Other features:

Input:

• USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB 5 Gbps.
• Speeds of up to 5 Gbit/s.
• Connection via USB-B female connector.

Device support:

• SATA III interface – 6 Gb/s (600 MB/s),
• 2.5″ SSD/HDD support,
• 3.5″ HDD,
• maximum drive capacity all unrestricted,
• maximum 2.5″ drive height all unlimited.

Power supply:

• Power supply via compact external AC/DC 12V – 2.5A (30W) adapter with 150 cm cable length.
• Power switch.

Disk cloning function:

• Cloning takes place without connecting the station to the computer.
• The target disk must have the same or greater capacity than the source disk, otherwise cloning cannot be activated.
• Both HDD and SSD drives can be cloned.
• Cloning is initiated by pressing the CLONE button and holding it for at least 3 seconds.
• 4 LED indicating the cloning process and completion of cloning.
• SSD cloning speed up to 300 MB/s.
• Total disk cloning time depends on the capacity of the source disk, not on the amount of data on the disk.

Designation:

Description:
No. of slots: 1
Form factor (width): 2,5“ (SFF)
HDD interface: SATA III – 6 Gb/s
I/O connectors: 1 x USB 3.0
Accessories included:

Cable USB 3.0

Color: Black
Dimensions:
Other features:

– Max. transfer rate: 5 GBit/s
– LED for operation and activity

Designation:

Description:

Docking & Clonstation
for M.2 NVMe SSD & 2,5“/3,5“ SATA SSD/HDD

IB-2914MSCL-C31

• NEW AT ICY BOX: The world has waited a long time for this, now it’s done: ICY BOX offers the first cloning station for 2.5“ and 3.5“ hard disks on M.2 NVMe SSD. Ignite the turbo for your system
• 100% TOOLLESS: Everything is very simple with ICY BOX. The unit is quickly installed with Plug & Play. The storage media are changed very simply and in a flash without tools. That saves time and nerves
• IGNITE THE DATA TURB: With USB 3.2 Gen 2, data transfer rates of up to 10 Gbit/s can be achieved. So you can take full advantage of the performance of your storage media and benefit from short charging times
• FLEXIBILITY: The USB 3.2 Gen 2 combo cable has a USB Type-C plug and also has a fixed Type-A adapter. Thus, there is always the possibility to choose the suitable host connection
• STATUS LEDs: The status LED reliably indicates the current cloning progress from 0% to 100%. In addition, there is a status LED for each drive, which informs about operation and access

 

No. of slots: 3
Form factor (width): M.2
Form factor (width): 2,5“ (SFF)
Form factor (width): 3,5“ (LFF)
HDD interface: NVMe
HDD interface: SATA I – 1,5 Gb/s
HDD interface: SATA II – 3 Gb/s
HDD interface: SATA III – 6 Gb/s
HDD interface: SATA
Supported operating systems: Mac OS
Supported operating systems: Windows
Accessories included:

• 1x USB Type-C to Type-C /Type-A Cable,
• 1x power supply,
• 2x M.2 fixation,
• 1x quick start guide

Color: Black
Dimensions:

100x144x59 mm

Weight: 0.301 kilogram
Other features:
Designation:

Description:

B-1232CL-U3 ICY BOX Dual HDD / Hard Drive USB 3.0 docking station for SATA 2.5 inch and 3.5 inch hard disk cloning station and reader, adapter, external Manufacturer information:

• HUGE CAPACITY: Expand your capacity with a dual docking and cloning station for 2.5″ and 3.5″ SATA drives. With SINGLE mode, both hard drives are recognized as separate drives
• SYSTEM REQUIREMENTS: A free USB 3.0 Type-A port on the host computer is enough to freely expand the storage capacity. The dock supports Windows and macOS
• VERY FAST: The USB 3.0 host connection supports UASP and guarantees data transfer speeds of up to 5 Gbit/s. You can also transfer large amounts of data without long waiting times
• HARD DRIVE CLONING: You can clone bootable hard drives at the touch of a button, even without a computer. The docking station draws power from the included power adapter. Data backup can be that simple
• ALWAYS INFORMED: Hot-swappable hard drives are easy to replace and boot. A total of four LEDs inform you of the cloning status and progress

 

 

No. of slots: 2
Form factor (width): 3,5“ (LFF)
Form factor (width): 2,5“ (SFF)
HDD interface: SATA
HDD interface: SATA III – 6 Gb/s
HDD interface: SATA II – 3 Gb/s
HDD interface: SATA I – 1,5 Gb/s
Supported operating systems: Windows
Supported operating systems: Mac OS
Accessories included:
Color: Black
Dimensions:

154x112x62 mm

Weight: 0.397 kilogram
Other features:
Designation: